6.1 Multiple choice questions.
|
1.
Viscosity
of a fluid depends upon |
|
|
(a)
Mass |
(b)
Density |
|
(c)
Volume |
(d)
Temperature |
|
2.
Drag
force exerted by the fluid on a body does not depend upon |
|
|
(a)
Viscosity of fluid |
(b)
Terminal velocity |
|
(c)
Shape of a body |
(d)
Volume of fluid |
|
3.
A steel
ball of radius ‘r’ is moving with uniform velocity ‘v’ in the mustard oil,
the drag force acting on the ball is ‘F’. What would be the drag force on the
steel ball of radius 2r moving with uniform velocity 2v in the mustard oil is |
|
|
(a)
F |
(b)
2F |
|
(c)
4F |
(d)
8F |
|
4.
When
two spheres of same volume but different masses fall through a fluid then |
|
|
(a)
Both gain their terminal velocity simultaneously |
(b)
Neither lighter nor heavier body gains its terminal velocity |
|
(c)
Lighter body gains its terminal velocity earlier |
(d)
Heavier body gains its terminal velocity earlier |
|
5.
Laminar
flow usually occurs at speeds |
|
|
(a)
Low |
(b)
High |
|
(c)
Very High |
(d)
Some time high & some time low |
|
6.
In
incompressible fluid, which parameter remains constant? |
|
|
(a)
Pressure |
(b)
Volume |
|
(c)
Temperature |
(d)
Density |
|
7.
Equation
of continuity has been derived on the bases of law of conservation of |
|
|
(a)
Energy |
(b)
Energy |
|
(c)
Mass |
(d)
Force |
|
8.
According
to equation of continuity A1v1= A2v2
= constant. The constant is Equal to |
|
|
(a)
Flow rate |
(b)
Volume of fluid |
|
(c)
Mass of fluid |
(d)
Density of fluid |
|
9.
When cross-sectional
area of a tube is decreased then the speed of fluid through it is; |
|
|
(a)
Increased |
(b)
Decreased |
|
(c)
Same |
(d)
Zero |
|
10. As the water falls its speed increases, so
its cross-sectional area |
|
|
(a)
Increases |
(b)
Decreases |
|
(c)
Remains constant |
(d)
Zero |
|
11. Bernoulli’s equation has been derived on the
bases of conservation of; |
|
|
(a)
Mass |
(b)
Energy |
|
(c)
Momentum |
(d)
Force |
|
12. What is the speed of water flow through a
tap which is connected with tank contains water at height of 2.5 m . |
|
|
(a)
5 ms-1 |
(b)
6 ms-1 |
|
(c)
7 ms-1 |
(d)
8 ms-1 |
|
13. A two-meter high tank is full of water. If a
hole appears at its middle, then the speed of efflux is |
|
|
(a)
4.42 ms -1 |
(b)
5.42 ms -1 |
|
(c)
6.42 ms -1 |
(d)
7.42 ms -1 |
|
14. Venturi-meter is an instrument which is
being used for the measurement of |
|
|
(a)
Density of fluid |
(b)
Velocity of fluid |
|
(c)
Pressure of fluid |
(d)
Viscosity of fluid |
|
15. When velocity of fluid is increased then its
pressure is; |
|
|
(a)
Increased |
(b)
Decreased |
|
(c)
Same |
(d)
Not velocity dependent |
|
16. Systolic pressure is called; |
|
|
(a)
Low blood pressure |
(b)
High blood pressure |
|
(c)
Normal pressure |
(d)
irregular blood pressure |
Answers
- (d) Temperature
- (d) Volume of fluid
- (c) 4F
- (d) Heavier body gains its terminal velocity earlier
- (a) Low
- (d) Density
- (c) Mass
- (c) Mass of fluid
- (a) Increased
- (b) Decreases
- (b) Energy
- (c) 7 ms-1
- (a) 4.42 ms -1
- (b) Velocity of fluid
- (b) Decreased
- (b) High blood pressure
6.2 Short question
7. How can transfer the laminar flow into the turbulent flow?
ans. Laminar flow can be changed into turbulent flow by introducing disturbances into the flow or increase the velocity of the fluid.
9. What are the three factors associated with an ideal flow?
ans. Characteristic of ideal flow
- The fluid is non-viscous.
- The flow is steady.
- The fluid is incompressible.
14. What is the difference between systolic and diastolic reading of blood
Pressure?
ans.
The systolic pressure is the maximum pressure your heart
exerts while diastolic pressure is the amount of pressure in your arteries
between the beats.
6.3 Numerical problems
5. Water flows through a horizontal pipe of non-uniform cross-sectional
area. The pressure is 130k pa where the velocity is 0.4 ms-1.
Calculate the pressure at the point where the velocity is 4 ms-1.
7. what is the height of water containing in tank? When the velocity of efflux of a water through
orifice from the tank 9.9 ms-1.
8. A liquid of density 8x103 kgm-3 is flowing through
a horizontal pipe of Different cross section. If the pressure difference
between two points is 4 x 104 Nm-2 then what is the speed
of liquid in the tube.
No comments:
Post a Comment